Double Offset Wafer Butterfly Valve 2-48 Inch Metal Seated

The triple eccentric butterfly valve, which makes use of a metal seat, is, therefore, able to withstand a greater amount of pressure, compared to a resilient seated butterfly valve. The seal of the eccentric disc could be either metal/Graphite multi-layer design or fully metal-to-metal design. The multi-layer design could achieve zero leakage and simple maintenance, while the metal-to-metal design is more reliable in higher temperature and pressure. Basically speaking, the triple eccentric butterfly valve is both applied in shutoff or throttling service.

Wafer type is the common style of a butterfly valve and is less expensive than the lug type. The wafer butterfly valve is installed between two flanges. The valve is kept in place by using bolts or studs and nuts from flange to flange. This type of installation, of course, makes it impossible to disconnect just one side of the piping system from the valve.

• Eccentric Disc Design
• Multi-layer Disc Seal Standard
• Fully Meal-to metal Seal Optional
• Uni-directional Flow
• Wafer Body Type, Lug Type or Flanged Type

• Design & Manufacture: API 609, EN 593, MSS SP-68
• Face to Face Dimension: API 609, EN 558
• End Connection: ASME B16.5, EN 1092, JIS B2220
• Test and Inspection: API 598, EN 12266